Get started

Open the back cover

Press the release button (1), slide the back cover upwards (2), and remove it.

This phone is intended for use with the BL-4C battery.

Always switch the device off and disconnect the charger before removing the battery.

Insert the SIM card and battery

1. Lift the battery, and remove it (1).

2. Insert the SIM card (2). Ensure that the gold-coloured contact area is facing down and the bevelled corner of the SIM card is slided in next.

3. Replace the battery and back cover (3, 4).

Remove the SIM card

Press the release spring (1) and slide out the SIM card (2).

Charge the battery

1. Connect the charger to a wall outlet.

2. Connect the charger to the phone. The battery indicator bar starts scrolling. When the battery is fully charged, the bar stops scrolling.

If the battery is completely discharged, it may take a few minutes before the charging indicator appears on the display or before any calls can be made.

Switch on and off

Press and hold the end key.

Use the phone only in its normal operating position.

Your device may have internal and external antennas. As with any radio transmitting device, avoid touching the antenna area unnecessarily while the antenna is transmitting or receiving. Contact with such an antenna affects the communication quality and may cause the device to operate at a higher power level than otherwise needed and may reduce the battery life.