Assembling and preparing your mobile phone

Get started by assembling and setting up your mobile phone for its first use.

Install the SIM card and battery

When you subscribe to a cellular service, you will receive a Subscriber Identity Module, or SIM card, with subscription details, such as your personal identification number (PIN) and optional services.

To install the SIM cards and battery,

1. Remove the battery cover.

If the phone is on, press and hold [] to turn it off.

2. Insert the SIM cards.

Place the SIM cards in the phone with the goldcoloured contacts facing down.

3. Insert the battery.

4. Replace the battery cover.

Charge the battery

Before using the phone for the first time, you must charge the battery.

1. Open the cover to the multifunction jack on the side of the phone.

2. Plug the small end of the travel adapter into the multifunction jack.

Improperly connecting the travel adapter can cause serious damage to the phone. Any damages by misuse are not covered by the warranty.

3. Plug the large end of the travel adapter into a power outlet.

4. When the battery is fully charged (the icon is no longer moving), unplug the travel adapter from the power outlet.

5. Unplug the travel adapter from the phone.

6. Close the cover to the multifunction jack.

About the low battery indicator

When your battery is low, the phone will emit a warning tone and a low battery message. The battery icon will also be empty and blinking. If the battery level becomes too low, the phone will automatically power off. Recharge your battery to continue using your phone.

Insert a memory card (optional)

To store additional multimedia files, you must insert a memory card. Your phone accepts microSD™ memory cards up to 8 GB (depending on memory card manufacturer and type).

1. Remove the battery cover.

2. Unlock the memory card cover.

3. Lift the memory card cover and insert a memory card with the label side facing up.

4. Close and lock the memory card cover.

To remove the memory card, open the memory card cover and remove the memory card out of the memory card slot.