USB

You can connect with other devices as a network de or external memory device by using USB interface.

Set a default action for your USB connection

To set your device to perform a default action when you connect the device to a PC with the PC data cable,

1. On the Home screen, press <Start> → <More> → Settings → Connections → USB.
2. Set the default USB mode (ActiveSync or Mass Storage).
3. Press <Done>.

To use ActiveSync, see "ActiveSync."

Copy files to a memory card

1. Insert a memory card into the device.
2. Change the USB connection to Mass Storage.
3. Connect your device to a PC with the PC data cable.
4. Open a folder to view files.
5. Copy files to the memory card and vice versa.
6. When you are finished, disconnect the device from the PC.

ActiveSync

With ActiveSync, you can synchronise your device with a PC and back up and restore your data.

Install ActiveSync on your PC

Before you can synchronise your data, you must install ActiveSync, either from the supplied CD-ROM or the Microsoft website (http:// www.microsoft.com).

To install ActiveSync from the supplied CD-ROM,
1. Insert the CD-ROM into your PC.
2. Follow the on-screen instructions to complete the setup.
3. When installation is complete, follow the on-screen instructions in the Synchronisation Setup Wizard to connect your device to the PC and create a data sharing partnership.

Synchronise your data

1. On the Home screen, press <Start> → <More> → Settings → Connections → USB.
2. Change the USB connection to ActiveSync.
3. Connect one end of the PC data cable to the multifunction jack on your device and the other end to the USB port on your PC.

When you connect your device to a PC, ActiveSync should begin synchronising your data automatically. You can begin the synchronisation manually by clicking Sync. To stop a synchronisation in progress, click Stop.
You can also manually find and copy files from your device to a PC and vice versa—from the Microsoft ActiveSync window, click Explore.
For more details on synchronising your data, refer to the ActiveSync Help.

Configure an Exchange server

1. On the Home screen, press <Start> → ActiveSync.
2. Press <Menu> → Add Server Source. If you have set up the synchronisation with an Exchange server, this will say Configure Source.
3. Enter your email address and press <Next>.
4. Enter a user name, password, and domain address.
5. Press <Next>.
6. Enter a server address.
7. To establish a secure connection, select the check box next to This server requires an encrypted (SSL) connection.
8. Press <Next>.
9. Select the types of data to synchronise.
10. When you are finished, press <Finish>.

Change the synchronisation schedule

If you routinely synchronise your data via an Exchange server, you can configure settings for both peak and off-peak schedules.

To change the synchronisation schedules,
1. On the Active Sync screen, press <Menu> → Schedule.
2. Set the following options:
• Peak times: set the frequency of synchronisations during peak hours
• Off-peak times: set the frequency of synchronisations during non-peak hours
• Use above settings when roaming:
set to use the synchronisation schedules even when roaming
• Send/receive when I click Send: set to synchronise each time you send or receive email
3. When you are finished, press <Done>.