Samsung GT-B7320: Assemble and prepare your device

Samsung >> Samsung GT-B7320 >> Assemble and prepare your device

Assemble and prepare your device

Get started by assembling and setting up your mobile device for its first use.

Install the SIM or USIM card and battery

When you subscribe to a cellular service, you will receive a Subscriber Identity Module (SIM) card, with subscription details, such as your personal identification number (PIN) and optional services.
To use UMTS or HSDPA services, you can purchase a Universal Subscriber Identity Module (USIM) card.

To install the SIM or USIM card and battery,

1. Remove the battery cover.

If the device is on, press and hold [

] to turn it off.

2. Insert the SIM or USIM card.

• Place the SIM or USIM card in the device with the gold-coloured contacts facing down.
• Without inserting a SIM or USIM card, you can use your device's non-network services and some menus.

3. Insert the battery.

4. Replace the battery cover.

Charge the battery

Before using the device for the first time, you must charge the battery.
1. Open the cover to the multifunction jack on the side of the device.

2. Plug the small end of the travel adapter into the multifunction jack.

Improperly connecting the travel adapter can cause serious damage to the device.
Any damages by misuse are not covered by the warranty.

3. Plug the large end of the travel adapter into a power outlet.
4. When the battery is fully charged (the icon is no longer moving), unplug the travel adapter from the power outlet.
5. Unplug the travel adapter from the device.
6. Close the cover to the multifunction jack.

About the low battery indicator
When your battery is low, the device will emit a warning tone and a low battery message.
The battery icon will also be empty and blinking. If the battery level becomes too low, the device will automatically power off.
Recharge your battery to continue using your device.

Insert a memory card (optional)

To store additional multimedia files, you must insert a memory card. Your device accepts microSD™ or microSDHC™ memory cards up to 16 GB (depending on memory card manufacturer and type).

Formatting the memory card on a PC may cause incompatibility with your phone.
Format the memory card only on the phone.

1. Open the battery cover and remove the battery.

2. Insert a memory card with the label side facing up.
3. Push the memory card in the memory card slot until it locks in place.
4. Replace the battery and battery cover.

To remove the memory card, remove the battery cover and battery and pull the memory card out of the memory card slot.