Settings

User Profiles

The phone provide six pre-defined user profiles that allow the operations of the phone to best suit the environment you are in. The profiles are General, Meeting, Outdoor, Indoor, Headset and Bluetooth. The phone will automatically enter the headset profile if you connect the headset. You can customize the following options for new profiles.

Tone Setup	Set Incoming Call, Alarm, Power On, Power Off, Message Tone and Keypad Tone.
Volume	Set volume for ring tone and key tone.
Alert Type	Four types of Ring, Vibration Only, Vibration and Ring and Vibration Then Ring are available for your selection.
Ring Type	Three types of Single, Repeat and Ascending are available for your selection.
Extra Tone	You can select one or more extra tones. The options are Warning, Error, Camp on, and Connect.
Answer Mode	If Any Key is selected, you can press any key to answer a call.
Equalizer	You can select Normal, Bass, Dance, Classical, Treble, Party, Pop, Rock.

Phone Setup

Time and Date

Set Home City	Set your time zone.
Set Time/Date	Set the time and the date.
Set Format	Set the format for the time and the data.
Auto update of date and time	This function requires network support. If activated, the time zone is switched automatically to local time by the network.

Schedule Power On/Off

Set the time to power on/off the phone automatically.

Warning: In specific areas where the use of phone is prohibited (such as in airplane), please remember to disable the automatic switch-on function before entering the areas to prevent unexpected accidents.

Language

Set current display language.

Preferred Input Methods

Set input method for text entry.

Display Characteristic

Wallpaper	Set the standby image of the phone.
Screen Saver	Set the time and image for the screen saver.
Power On Display	Set the animation displayed when the phone is turned on.
Power Off Display	Set the animation displayed when the phone is turned off.
Show Date and Time	If activated, date and time are displayed on the idle screen.
Show Owner Number	If activated, the phone number is displayed on the idle screen.
LCD Backlight	Set the brightness and time of LCD backlight. LCD backlight will be off automatically if the phone is not operated within a specific time period.

Greeting Text

If activated, the greeting text appears when the phone is turned on.
You can edit the greeting text.

Speed Dial

You can assign number keys 2 to 9 as shortcuts to important phone numbers. Press and hold a corresponding number key in idle screen to dial the number.

Note: Number key 1 is predefined as the speed dial key for the voice mail number. You cannot change this function.

Dedicated key

You can assign the navigation key as shortcuts to important functions.
Press the corresponding navigation key in idle screen to start the function.

Shortcuts

A list of shortcuts is displayed for you to access quickly.
In the shortcut list, press the up and down direction keys or the number keys to access the designated function.
Select Option to edit the selected shortcut.

Call Setup

Caller ID

When you make a call, your number can be shown or hidden on the display of the called party. Select Set By Network to use the default setting provided by the network operator.
You may not be able to make calls if you select Hide Id, depending on the network setting.

Call Waiting

Activate	If activated, an incoming call is signaled by a call waiting tone when you are on another call. The number/name of the incoming call is displayed.
Deactivate	Cancel the call waiting function.
Query Status	Inquire the current status from the network.

Call Divert

You can specify the conditions under which call should be diverted to your voice mail box or another number.

Divert All Voice Calls	All calls are diverted.
Divert If Unreachable	A call is diverted if the phone is switched off or is out of range.
Divert If No Answer	A call is diverted if not answered.
Divert If Busy	A call is diverted if another call is in progress.
Divert All Data Calls	All data calls are diverted.
Cancel All Divert	Cancel all call divert settings.

Call Barring

Restrict the dialing or receiving of certain calls. To activate or cancel call barring, you have to enter the network password provided by your network operator.

Outgoing Calls	If All Calls is activated, no calls can be made. If International Calls is activated, no international calls can be made. If International Calls Except To Home PLMN is activated, only local calls or calls to the home country (that is, the country to which the network operator belongs) can be made.
Incoming Calls	If All Calls is activated, no calls can be received. If When Roaming is activated, you may not receive calls when you are outside your home network.
Cancel All	Cancel all restrictions to calls. Password from your network operator is required.
Change Barring PW	Change barring password. The original barring password is required.

Line Switching

Switch to Line 1 or Line 2.

Note: If you select Line2, whether you can make calls is dependent on the network operator.

Call Time Reminder

If activated, the phone beeps at the interval time you set during a call.

Call Time Display

Choose whether to display the current call duration during a call.

Auto Redial

Once activated, the phone will automatically redial, if there is no answer at a number you have dialed.

Closed User Group

This function requires network support.
1. Select Ok to display Group List.
2. Select Add to enter group name.
3. Select Done and enter the serial number, to complete the addition of a new group.

Black List

Set whether to enable the black list function. You can add five black list numbers.

Network Setup

It requires network support.
The network that your phone uses is configured automatically. When turned on, the phone automatically connects to the designated network, or automatically connects to a roaming network when you are outside the coverage of your regular network. When outside the coverage of your regular network, you can manually select the local network system.

For Master card:

1. Network Selection

Automatic	The phone will scan for the available network when you are outside the home network.
Manual	The phone will list all networks for you to choose from when you are outside the home network.

2. Preferred Networks

Select the preferred network operator. The default is the network of your SIM card.

3. GPRS Connection

Select to change the GPRS connection mode between Always and When Needed.

For Slave card:

1. Network Selection: The phone will scan for the available network when you are outside the home network if you select Automatic; the phone will list all networks for you to choose from when you are outside the home network.

2. Band Selection: 900/1800 can be selected.

3. Slave Power Setting: Select on / off to turn it on / off.

Security Setup

The phone provides several codes to protect your phone against misuse.

SIM Lock	The SIM card is protected against misuse by the PIN code. SIM card lock may be set after you enter the PIN code correctly.
Phone Lock	If the phone lock is activated, the phone lock password is requested when the phone is switched on. The default password is "1122". When the phone is locked, only emergency calls can be made.
Auto Keypad Lock	Keypad lock prevents the inadvertent phone usage. However, you can still be called and you can make an emergency call.
Fixed Dial	You can define a list of numbers that can be dialed. Numbers not included in this list cannot be dialed. Note: The PIN2 code is required. Once the PIN2 code is entered when the phone is turned on, it is no longer required until next time the phone is turned on.
Barred Dial	It requires network support. If your SIM card supports this function, you may restrict the numbers for outgoing calls. If activated, your phone may not call the numbers in the Fixed Dial list. The PIN2 code is required for this setting.
Change Password	Set new passwords, including PIN, PIN2 and phone lock password.

Restore Factory Settings

Reset the phone to default values (factory settings).
The phone password is required, which is "0000" by default.