Phone Overview

1. Volume key
2. Display
3. Left Soft key
4. Calling key
5. Number key
6. Earpiece
7. Direction key
8. Right soft key
9. Ending key
10. Connection jack
11. Camera
12. Battery cover

Communication control keys

Calling key is used to make a call from the master card after a number has been entered or selected from the phone book, or to answer an incoming call. In idle screen, press calling key to show call logs (call history).
Left soft key is used to make a call from the slave card after a number has been entered or selected from the phone book.
Ending key is used to end a call during calling or conversation, or to quit the menu and return to idle screen. Press and hold the ending key for about two seconds to turn the phone on/off.

Direction keys

Go to Settings > Phone Setup > Dedicated key to set direction keys.

OK key

In idle screen, press the OK key to open the main menu. In lists and menus, press the OK key to start an application/function.

Left and right soft keys

In idle screen, press the left soft key to open the main menu, and then use direction keys to scroll through the main menu. In idle screen, press the right soft key to access Phone Book List. During menu operation, the current functions of the left and right soft keys are shown in the bottom line of the screen, and they are closely related to the current status of the phone.

Number keys

Press number keys (0-9) to enter numbers.
Press and hold number keys (2-9) to start speed dial.
You can also use number keys to select menus. If a number is shown before an option in menu list, you can select the option quickly by pressing the corresponding number key.

Asterisk key

Press the asterisk key to enter "*".
Press the asterisk key twice in a row to enter "+", to make an international call.
In idle screen, press and hold the asterisk key to lock the keypad; to unlock, press the right soft key and then the "#" key.

Pound key

Press the pound key to enter "#".
Press and hold the pound key in idle screen to activate/deactivate the Silent mode.
When in an editing screen, press the pound key to change the input method.

Volume key

Press the volume key to increase/decrease volume.

Connection jack:

The connection jack is used to connect charger, headset and USB cable.

Icons displayed on the main screen (Icons may be changed without further notice)

The following icons may be displayed in the first line of the screen.

	Signal strength
	Battery status
	Keypad locked
	Alarm activated
	New SMS received or SMS full
	New MMS received
	Phone call(s) missed
	Connected to the GPRS network
	Ring
	Vibration and ring
	Vibration only
	Vibration then ring