Call function

You can dial and receive call when sign of network suppliers is shown on the display screen.
This function have three interfaces: dial call, incoming call and connecting call;
Message bar on left-up corner of display screen shows signal intensity of Network.
The connection effect is much affected by obstructions;
therefore the signal intensity can be effectively improved in small scope.

Note:
In any country where digital GSM network is being used, you could have call urgent service when you are in the scope network covered (you can know it by checking signal intensity of network on the left-up corner of display screen of mobile phone).
Display screen will show “Emergency calls only), indicating that you can just use this kind of call if roaming service has not been provided by your Network supplier in this area.
You can make an urgent call even if no SIM Card if you are in the covered scope of Network.

Dialing

Dial processes include four states such as: dial, call, automatic DTMF and call ring of opposite party.

Enter any number can enter dial state when standby;
    Operation for pressing keys on dial interface:
        Key LSK: store numbers in Phone Book;
        Key RSK: delete numbers input;
        Key End: return to idle interface;
        Key Send: dial numbers input;
        Key direction: move cursor.
Call interface can be entered on the two conditions as following: a .Press Key Send after entered numbers when standby, b .Press Key Send after selected and added numbers through “Phone Book”.
    Display the number of the opposite party if his/her number doesn’t exist in Phone Book, otherwise display his/her name.
    Cut off when used Key RSK and End Key.
The method for dialing domestic call: Area Code + call number + Send Key
Dial the extension number of fixed phone: Area Code + number of calling phone+ P + extension number+ Send Key
    The method for entering “P” as following: press for a long time or rapidly three times key “*” (symbol “P” will be shown on the display screen at this time)
The method for dialing international fixed phone: Area Code “ + “ + entire phone number + key send
    The method for entering “ + “ below: press for a long time or rapidly two times key “*” (symbol “+” will be shown on the display screen at this time)

Receiving

When incoming call, enter interface for incoming call and set mode of ring call or vibration according to current ring.

Display the number of the opposite party if his/her number doesn’t exist in Phone Book, otherwise display his/her name.
Operation for pressing keys
    Send Key: receive;
    RSK Key: reject a call;
    End Key: reject a call

Option in connection

Operation for pressing keys when calling as following:
    LSK Key: enter items for call menu;
    RSK Key: open hands-free function;
    Send Key: hold current call;
    End Key: cut off call;
In the option of call, you can operate as following:
    Hold
    End
    New call
        Switch to activate or hold by key number 2 + Send when multiple call.
    Phone Book
    SMS
    Sound Recorder
    Mute
    DTMF
    In Call Background Sound

Call History

Press Send to enter Dialed Calls when standby, you can check latest dialed calls;
You can check specific message (see P45 for details) by Call History in function menu.

Volume adjustment

Realize volume to be adjusted by Side up Key and Side Down Key.