Fly B600: Start to use - Mobile-manual.com

Fly >> Fly B600 >> Start to use

Fly B600: Start to use

Start to use

On/Off mobile phone

Press END Key for a long time to realize the On/Off function.

Installation and disassembly of battery, SIM Card and memory card

You can get a SIM Card containing your proprietary information when you apply for network connection, such as PIN Code, service option available.

Note of using SIM Card:
    All mini SIM Card should put in safe place where the children cannot touch;
    SIM Card and its touch point is easy to damage people or be destroyed by bend, therefore you should be very careful when carry, insert and take out SIM Card;
    Please make sure to turn off mobile phone and take out battery before inputting SIM card.
Installation and disassembly of battery and SIM card:
    Press End key till mobile turns off if necessary.
    See figure 1, slide down battery cover ;
    See figure 2, lift it from left end clip and take out battery,
    See figure 3, insert SIM Card into the SIM socket till it can not be pushed.
        Metal touch point of SIM Card shall face down, match with the bottom of metal slice on the SIM socket;
        If the shell body is marked, SIM Card shall face left bottom;
        If you would like to take out of the SIM Card, you can put the metal slice on the top of SIM Card, then SIM Card meantime can be put;
    Installation of battery; see figure 2
        Match metal touch point with corresponding spring on battery socket , then press down and take out battery;
    Installation of battery cover, see figure 1
        Put the clip on the two ends of battery cover to groove of the back shell, and then put the battery cover up to the back shell, it is OK when hearing “click”.

    Install and disassembly of T-flash Card
    Socket of T-flash of Push-push will be used in this mobile phone, and it is compatible insert-put function;
    Installing T-flash Card. Open protection bolt of socket, insert memory card into socket, it is Ok to press it till hearing “click”;
        Metal of T-flash card shall face downwards;
    Taking out T-flash and push memory card inside continually and discharge it till hearing “click”, memory card will be spring out automatically, then take out memory card.