Get started

First steps to operating your phone

SIM card information

When you subscribe to a cellular network, you receive a plug-in SIM (Subscriber Identity Module) card loaded with your subscription details, such as your PIN, and available optional services.

Install and charge the phone

1. Remove the battery cover.
If the phone is already on, first turn it off by pressing and holding End key
2. Insert the SIM card.
Make sure that the gold-colored contacts on the card are face down.
3. Install the battery.
4. Replace the battery cover.
5. Plug the travel adapter into the phone.
6. Plug the adapter into a standard AC wall outlet.
7. When the phone is completely charged (the battery icon becomes still), unplug the adapter from the power outlet.
8. Remove the adapter from the phone.
9. Switch the Phone On/Off
10. Enter Your Pin (Access Codes)
11. Dial the Phone Number Required

Low battery indicator

When the battery is low a warning tone sounds, the battery low message displays and the empty battery icon blinks. If the battery level becomes too low, the phone automatically turns off. Recharge your battery.

Power On or Off

1. Hold down the power on/off key for more than one second to switch on.
2. Enter your SIM card PIN, if requested. The phone searches for your network and when detected, will display the idle screen. The external display shows the signal strength, battery strength and current time and date.
3. When you wish to switch off the phone, hold down the power on/off key for more than two seconds.

Access Codes

There are access codes for your SIM card. These codes help you to protect the phone against unauthorized use.
When requested for any of the code explained below, key-in the appropriate code (displayed as asterisks) and press the OK key.

• PIN
The Personal Identification Number or PIN (4-8digits) protects your SIM card against unauthorized use. The PIN comes with the SIM card; see the SIM card instruction provided with your card.
If you enter an incorrect PIN three times in succession, the code will be disabled and cannot be used until you re-enable it by entering the PUK.
• PUK
The 8-digit PUK (Personal Unblocking Key) is required to change a disabled PIN. The PUK may be supplied with the SIM card. If not, or in case you have lost it, please contact your service provider.
To re-enable your PIN, proceed as follows.
1. Key-in the PUK and press the OK key.
2. Enter a new PIN of your choice and press the OK key.
3. When the Confirm New PIN message is displayed, key-in the same code again and press the OK key.
If you enter an incorrect PUK ten times in succession, the SIM card becomes invalid. Please contact your service provider for a new card.
• Pin Password
The 4 ~ 8 digits of password is required when you use the Call barring function. You can obtain the password from your service provider when you subscribe to this function.

Customize your phone

• Display language
Select the language for your phone menus.
[Menu]  [4.Setting]  [4.1 Phone Setup]  [4.1.3. Language]
• Time and Date
Set time and date for your phone
[Menu]  [4.Setting]  [4.1 Phone Setup]  [4.1.2. Time and Date]
• Call ringer melody
[Menu]  [4.Setting]  [4.1 Phone Setup]  [4.1.1. Profiles]
• Idle mode Wallpaper
Set wallpaper for the idle screen on the display.
[Menu]  [4.Setting]  [4.1 Phone Setup]  [4.1.5. Display Settings]
• Phone lock
Protect the phone against unauthorized use with a phone password.
The phone will require the password on power-up.
[Menu]  [4.Setting]  [4.4 Security Setup]
• Set Dedicated key
Set up a menu for your own favorite menu items.
[Menu]  [4.Setting]  [4.1 Phone Setup]  [4.1.6. Dedicated key]