Connectivity
11.1 Bluetooth Mode
To connect this phone to other Bluetooth device, set this option to On.
icon will appear on the idle screen.
The phone’s Bluetooth power will be turned on, until you turn the Bluetooth
Mode off. When you turn off your phone’s power, and turn on the next time,
the Bluetooth power will be on. If the Bluetooth device was connected, the
phone will connect to the device when the phone’s power is back on.
Note: When you are not using the Bluetooth feature, set the
Bluetooth Mode to Off, in order to save the battery power.
11.2 My Device
This menu will search for the Bluetooth device(s) within the range of your
phone. You can conveniently connect to the frequently using Bluetooth
device by using this menu.
1. Put the device nearest possible when you search a new device.
2. Check to turn on your phone and the new device. For turning on your
new device, see instruction provided by the device manufacturer. Make
sure your phone is in Bluetooth Mode.
3. Select “Search for Devices” to find the new device.
4. After your phone finds the device, press [Bond] soft key (left), it might ask
for a pass code. Default pass code is depending on the Bluetooth device.
You might try 0000 as a pass code. Usually the Bluetooth audio device
provides a guide with this pass code.
5. The phone and device will be paired and connected. If you fail this pair
procedure, try again or contact the device manufacturer, or change to
other device.
Note: Please use recommended Bluetooth devices for optimal use.
Option:
1) Connect: you can connect to the listed Bluetooth device.
2) Rename: you can edit the device name.
3) Delete: you can delete the saved device from the My Device list.
A. Delete All: you can delete the all saved device from the My Device list.
B. Service List: you can also search for the service list.
11.3 Active Device
11.4 Settings
Visibility
You can set your phone visible to other Bluetooth devices. If you set this
On, other devices can search your phone as a Bluetooth device. You can
only change this option when the Bluetooth Mode is On.
My Phone Name
Name your phone name by using this option. When other Bluetooth
device searches your phone, this name will be displayed.
Authentication
Set Authentication On or Off. You can only change this option when the
Bluetooth Mode is On.
Audio Path
(1)Leave in Phone
(2)Forward to BT Headset
FTP Settings
Set shared folders of File manager when you send data by Bluetooth.
11.5 About
This menu will display your Bluetooth’s profile. (Handsfree, Headset, SPP,
DUN, OPP, FTP, A2DP, AVRCP)
