Settings

You can change settings for your phone using this menu.
There are Phone Setup, Call Setup, Network Setup, IrDA, Bluetooth, Security Setup and Restore Factory Settings sub menu.

PHONE SETUP

With this menu, you can setup settings regarding display and operations of the phone:
Profile
You can use the “Profile” feature to customize various settings depending on environments, such as General, Meeting, Outdoor, Indoor and Headset.
Select each environment and select “Activate” to activate the setting. Select “Customize” to customize the Profile settings.
Customizable options are as following:
1) Tone Setup
This menu customizes the tones in the following setups.
(1) Incoming Call
This option allows you to select the required ring tone. You can set the ring tone from sound files downloaded from WAP download, MMS and EMS. You can also forward files from microSD Card Memory to the Tone Setup. Each time you select a tone, the phone will play it for a few seconds.
(2) Alarm
This option allows you to select the alarm sound.

You can set the alarm tone from sound files downloaded from WAP download, MMS and EMS. You can also forward files from microSD Card Memory to the Tone Setup. Each time you select a tone, the phone will play it for a few seconds.
(3) Power On
You can select power on sound from tones or silent. The phone will play the Power On tone, when you power on the phone by pressing the End/Power key.
(4) Power Off
You can select power on sound from tones or silent. The phone will play the Power Off tone, when you turn off the phone by pressing the End/Power key.
(5) Message Tone
You can select message alert sound from tones or silent. The phone will play the Message Tone, when you receive a message.
(6) Keypad Tone
This option allows you to select the tone that the keypad generates when you press a key.
- Silent: the keys do not make any sound
- Click: the key will make sound
- Tone: the keys will make sound
- Human Voice Tone: the keys will make human voice tone
2) Volume
This option allows you to adjust the ringer volume of Ring Tone, Keypad Tone, and Power Tone. You can set different volume levels for the Ring Tone, Keypad Tone and Power Tone.
3) Alert Type
This option allows you to customize the alert type.
This setup will control the alerts your phone might play.
You can customize the alert types as following.
- Ring: the phone rings with the ring tone selected in the [Tone Setup] option.
- Vibration Only: the phone vibrates without ringing.
- Vibrate and Ring: the phone vibrates and rings simultaneously.
- Vibrate then Ring: the phone vibrates first then rings.
4) Intelligent Call Alert
If Intelligent Call Alert function is on, you're able to hear "Human Voice Tone," and then the incoming melody starts.
5) Ring Type
You can set the ring type for playing the ring tones.
Single: plays the ring tone once.
Repeat: plays the ring tone in repeated matter.
Ascending: plays the ring tone with ascending volume.
6) Extra Tone
You can set the following alert tones on or off.
- Warning
- Error
- Camp On
- Connect
7) Answer Mode
Any key answer, Send key answer and Auto Answer (headset and Bluetooth profile)

Time and Date

You can set time and date for your phone.
1) Set Home City
This menu allows you to set a city as your home city.
2) Set Time/Date
This menu allows you to set the current time and date displayed in the idle screen.
3) Set Format
This menu allows you to set Time Format and Date
Format.
4) Day Light Saving time
5) Auto Update of Date and Time

Language

This menu allows you to set the display language.

Preferred Input Methods

This menu allows you to define your preferred input method. Once you set the preferred input method, next time you edit in text input mode, it will reflect the setting until you change to another.

Display Settings

This menu allows you to customize desired phone display items as below.
1) Wallpaper
2) Screen Saver
3) Power On Display
4) Power Off Display
5) Main Menu Style
6) Greeting Text
7) Contrast
8) LCD Back Light
9) Show Date and Time
10) Show Owner Number
11) Show Operator Name

Dedicated Key

This menu allows you to set the dedicated function for the 4-way navigation key in the idle mode.
Select from the menu lists, and press [Ok] key to change the dedicated menu.

Default Dedicated Keys: - Up: Bluetooth
- Down: Audio Player
- Left : Write Message
- Right: Tone Setup

Flight Mode

Flight Mode enables you to use certain functions of your phone without disrupting sensitive radio equipment when flying or in a hospital, for example. Please note, you will not be able to make calls or send messages/emails while Flight Mode is enabled.
You can set Flight Mode to Normal Mode, Flight Mode, or Query When Power On (this will ask if you want to put your phone in Flight Mode when you power on your phone.)

Note: To cancel out the Flight Mode, press [Menu] and select Settings> Phone Setup> Flight Mode> Normal Mode.

CALL SETUP

The following Call Setup features are network services.
Please contact your network service provider to check availability and subscribe to the feature.

Caller ID

This network service informs your Caller ID to the recipient when you call out.

Call Waiting

This network service informs when someone is trying to reach you during another call. You can specify the call waiting option for voice calls only.

Call Divert

This network service reroutes incoming calls to the number that you specify.
Example: you may wish to divert your business calls to a colleague while you are busy. Call diverting can be set up in the following ways.
Divert All Voice Calls: diverts all voice calls.
Divert If Unreachable: diverts calls, if you are not in a coverage area of your service provider.
Divert If No Answer: diverts calls, if you do not answer the phone.
Divert If Busy: diverts calls, if you are already making another call.
Divert All Data Calls: diverts all data calls.
Cancel All Divert: cancels all call diverting options.

Note:
The phone sends your settings to the network and the network will acknowledge the settings. You can deactivate all call diverting settings by selecting the Cancel All.

Call Barring

This network service allows you to restrict your call for Outgoing Calls, Incoming Calls.
You can also Cancel All call barring settings. You will be able to make and receive calls normally.
You can set and change the call barring password obtained from your service provider using this option.
You must enter the current password before you can specify a new one.

Note:
The phone sends your settings to the network and the network returns the acknowledgement. You can deactivate all call barring settings by selecting the Cancel All.

Call Time Reminder

You can set the call time reminder. Options are Off, Single, and Periodic.

Call Time Display

If you want, you can set the phone to display the call time.

Auto Redial

This option allows you to set redial automatically when the call receiver is busy. If you set [Auto Redial] on, it will redial 10 times to make a call.

NETWORK SETUP

Network Setup helps you in Network Selection (Automatic/Manual), selection of Preferred Network, and GPRS connection
Network Selection
The Network Selection feature enables you to select automatically or manually the network used when roaming outside of your home network.

Note:
You can select a network other than your home network only if it has a valid roaming agreement with your home network.

Options are as following:
1) Automatic: You will be connected to the first available network when roaming
2) Manual: The phone scans for the available network, and you can select the network manually.
Preferred Networks
You can set your preferred networks from PLMN list.
You can Add From List, Create New, Change Priority and Delete
GPRS Connection
Press [Change] soft key (left) to change the setting for the GPRS connection.

Bluetooth

Your phone supports Bluetooth connections. This phone supports Bluetooth v1.2 A2DP (Stereo Headset), HSP (Headset), HFP (Hands-free), DUN, FTP, and OPP.
Usually the range is approximately within 10 meters; however, it can vary depending on device or environment.

Note: You may input pass code to pair (or bond) with a Bluetooth device.

Bluetooth Mode

To connect this phone to other Bluetooth device, set this option to On.

icon will appear on the idle screen.

If the Bluetooth device was connected, the phone will connect to the device when the phone’s power is back on.

Note: When you are not using the Bluetooth feature, set the Bluetooth Mode to Off, in order to save the battery power.

Inquiry BT Device

This option will search for device(s) within the range of your phone.
1) Place the device close to the handset (as close as possible) when you search a new device.
2) Check to turn on your handset and the new device.
For the new device, see instruction provided by the device manufacturer. Make sure your phone is in Bluetooth Mode.
3) Select “Inquiry BT Device” to find the new device.
4) After your phone finds the device, press [Pair] soft key (left), it might ask for a pass code. Default pass code is depending on the Bluetooth device. Usually the Bluetooth audio device provides a guide with this pass code.
5) The phone and device will be paired and connected.
If you fail this pair procedure, try again or contact the device manufacturer, or change to other device.

Note: Please use recommended Bluetooth devices for optimal use. For compatible devices, please refer to your phone dealer.

My Device

This will display Paired Device(s), which have been connected and registered with your phone. You can conveniently connect to the frequently using Bluetooth device by using this menu.
Option:
- Connect: you can connect to the listed Bluetooth device.
- Rename: you can edit the device name.
- Delete: you can delete the saved device from the My Device list.
- Search new device: you can also search for new device.

Active Device

Lists the devices currently active and paired with your handset. You can disconnect a particular device by pressing left soft key (Disconnect)

Settings

Visibility
You can set your phone visible to other Bluetooth devices during a device search.
Change Device Name
Edit your phone name by using this option. When other Bluetooth device searches your phone, this name will be displayed.
Authentication
Set Authentication On or Off. You can only change this option when the Bluetooth Mode is On.
Audio Path
Select the audio path from “Leave in Phone” or “Forward to BT Headset”
FTP Settings
You can set Shared Folder and Access Right.

Shared Folder: Select the default folder using this option
Access Right: Fully Control or Read Only
About
Briefs you about the Bluetooth feature of your phone.

You may use the IrDA port of your phone to send or receive files with other phone or PC equipped with IrDA port.

Activation Menu

Open / Close : allows you to open or close the IrDA port.
After selecting the IrDA to Open, you may send files from Phonebook, My vCard, Camera, Video, or from a File Manager.

Storage Location

You can choose where to save the files, either to phone or Memory Card.

SECURITY SETUP

There are six types of security setting categories, and you can optimize security mode by choosing sub menus in “Security Setup” in “Settings” menu. These security settings will help you to keep privacy and to prevent other people from using the phone without your permission.

PIN Lock

When the PIN Lock feature is on, the phone only works when you enter PIN code for the SIM card. If you turn on the phone with the SIM card, the phone will ask for the password. Once the correct password is entered, the phone will work with the SIM card.

Phone Lock

When the Phone Lock feature is on, user must enter the password each time you turn on the phone. Making call or operating the phone is not available without the password.

Auto Keypad Lock

To prevent unwanted accidental key presses, you can use this auto keypad lock function. You may not make a call or operate the phone until you press the unlock code.
However, answering a call, receiving messages are available without entering the unlocking key sequence.
To change the Keypad Lock setting,
1) Press and hold the * key or
2) Press the menu key and select 4. Settings / 4.4
Security Setup / 4.4.3 Auto Keypad Lock.
To unlock the Keypad Lock time setting,
1) Press the [unlock] soft key (left) and * key in sequence, each time you need to release the keypad lock.

Fixed Dial

When the Fixed Dial mode is enabled, the person using this phone can call to the phone numbers stored in the Fixed Dial List only. To make a call to the number not starting the numbers stored in Fixed Dial List, you must enter the PIN2 to disable Fixed Dial mode. If the SIM card does not have PIN2, this feature is not supported.
In the Fixed Dial Mode, you can use several useful functions as following.
1) View and Edit: you can see and edit FDN entry after input PIN2.
2) Add : you can add FDN entry after input PIN2.
3) Delete: you can delete FDN entry after input PIN2.
4) Short Type: you can choose short type among Number / Name / Sequence.

Barred Dial

When the Barred Dial mode is enabled, the person using the phone cannot call numbers in the barred dial list. To call a barred number, you must enter the PIN2 to disable the barred dial mode. If the SIM card does not have PIN2, it will not support the Barred Dial feature.

Change Password

To change the password, input the current password, and then enter the new password.

Note: The initial password is “0000.” After you change your password, you will need to input the password. If you forgot your password, contact the service center.

RESTORE FACTORY SETTINGS

This feature would reset the phone to the same settings as those configured at the factory. In this case, it does not delete the downloaded objects and phonebook records.
You will need to input password to restore factory settings. The initial password is 0000.