#
 
#####
#
#
#
eng
#
ger
#
spa
#
#
#
#

Wi-Fi – ýòî òåõíîëîãèÿ áåñïðîâîäíîãî øèðîêîïîëîñíîãî äîñòóïà â Èíòåðíåò, îáåñïå÷èâàþùàÿ ïîëüçîâàòåëÿì ìîáèëüíûõ òåëåôîíîâ è ÊÏÊ áîëüøå âîçìîæíîñòåé äëÿ ðàáîòû è ðàçâëå÷åíèé âíå äîìà èëè îôèñà: â ãîñòèíèöàõ, àýðîïîðòàõ, êàôå è äðóãèõ ìåñòàõ, îñíàùåííûõ òî÷êàìè äîñòóïà ñòàíäàðòà Wi-Fi.

#
Fly >> Fly 2040i >> General Functions
Fly 2040i: General Functions
Fly 2040i: General Functions

General Functions

MAKING A CALL

To make a call on your phone, check the phone if the screen is idle and the phone indicates network signal. Then key-in the area code and phone number using the numeric keys and press the Send Key.

MAKING AN INTERNATIONAL CALL

Press the “*” key twice to display “+” character.
Input the country code, area code (without the leading zero), and the phone number. Then press the Send Key.
The ‘+’ informs the network that it is an international call.

SEARCH NUMBER

1. [Name] in Idle Screen:
When you make a call, press the [Name] soft key (right) from the idle screen. You can search the phonebook entries from “All location, SIM card, and Phone.” You can choose a phonebook name by pressing the up & down navigation keys. It will display a phone number under the name. Also enter the name you want to search for, it will display the name from the list. Press the Send key to make a call. If you want to view the details of the phonebook entry, select the [Option] soft key and select “View.” Press the Send key to make a call. If there is no phone number in your phonebook, it will display [Empty].
2. Search in Phonebook menu:
You can store the names and phone numbers in the SIM card and phone memory in the [Phonebook]. If you want to find a number by phonebook name, press the [Menu] soft key (left), and select “Phonebook”.

MAKING A CALL WITH SPEED DIAL

To use Speed Dial feature, press and hold the speed dial number key, the phone will dial to the associated phone number. (See 1.7 Speed Dial, for detail).

MAKING A CALL FROM MESSAGE

You can make a call from message by pressing the [Ok] soft key (left) and [Option] soft key (left) and select “Use Number” and press the Send Key when the number you want to call back is highlighted, or select “Dial” menu in the “Use Number” list.

REDIALING THE LAST NUMBER

The phone stores the last dialed and received numbers.
To recall any of these numbers, press the Send Key to display a list of the last dialed numbers.

EMERGENCY CALL Ensure that the phone is switched on and in service.
Enter the emergency number (Official Emergency Number or second official emergency number) and press the Send Key. Provide your location. Do not end the call until given permission to do so. End the call by pressing the End key.

Note : When “Enter Lock Code” or “Enter PIN” messages are prompted on the display during poweron, some network may not allow emergency call.
However, some network may request to insert a SIM card and enter Official Emergency Number.

ENTERING A “PAUSE OR WAIT”

You may enter a pause (“P”) character into a dial string by pressing the left special function key “*” three times. Press the left special function key “*” four times to enter a wait (“W”) character into a dial string.

ENDING A CALL

When you have finished your call, press the End key for a short time.

SD Card

Warning: It is highly recommended to use only the genuine microSD cards approved and specified by the “SD Card Association.” http:// www. sdcard. org or SanDisk. Using other products that are NOT indicated by SD Card Association or SanDisk may cause damage to the microSD card slot of your phone.

INSTALLING THE MICROSD CARD

Lift up the battery pack, and open the SD Card slot guard and place the microSD card in the slot as shown below.

Note: It is recommended that microSD card has about 100KB free space for Audio File play list. If the microSD card is full, the phone may not able to play a new music file. * In case the Storage Mode is selected WITHOUT inserting the microSD memory card, “No memory card” warning will appear. Note: The USB data cable from your package is used for both data transmission and power charging cable, however, the charging level will differ from the travel charger.

UNINSTALLING THE MICROSD CARD

Slide the protector up and push the card to slide out. After uninstalling the card, close the protector.

 
 

Main page   |    New manuals   |    Top   |    Contacts   |    Models list   |    Sitemap
Copyright © 2012 mobile-manual.com.